http://feeds.feedburner.com/TeknisiLaptopIndonesiacom
1. Cara Praktis Flashing Ponsel Samsung.rar 2. Cara Praktis Flashing Ponsel Sony Ericsson.rar 3. Diagram Blok Pada Ponsel.rar 4. Fungsi Setiap Komponen Ponsel.rar 5. Fungsi Tombol Pada Ufs Tornado.rar 6. Installasi Driver & Data Ufs Tornado.rar 7. Installasi Software Ufs Box Tornado.rar 8. Kerusakan 1st Boot Error dan Bad Resp DCT3.rar 9. Kerusakan Contact Retailer dan Blinking Nokia 6600.rar 10. Kerusakan Contact Retailer dan Blinking.rar 11. Kerusakan Contact Service.rar 12. Kerusakan Pada Setiap Komponen.rar 13. Komponen Elektronika Dasar Ponsel.rar 14. Mengatasi Phone Lock Ponsel Nokia.rar 15. Not Charging dan No Signal Karena Software.rar
clear

Secret Codes HP (Part 2)

GSM MOTOROLA SECRET MOBILE CODES 

Motorola 

IMEI number: * # 0 6# 
Net Monitor ON: * * * 1 1 3 * 1 * [OK] 
Net Monitor OFF: * * * 1 1 3 * 1 * [OK] 
* - press this until box shown up

To activate RBS:

(pause means the * key held in until box appears)

[pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]

You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.

To de-activate RBS,

[pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]

This only works with some versions of software. Please report what works and doesn't for you.

Reported working, by country: 

d460: IT 
6200 Flare: UK (Orange), AU 
7500: IT (model: F16 HW: 5.2 SW: 2.1) 
8200: ES, AU, NL, BE 
8400: IT, NL 
8700: AU, IT, SG, DE, ES, ZA 
Uses of RBS: 


Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.

Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.

SONY ERICSSON SECRET CODE 

General Secrets 

IMEI (International Mobile Equipment Identity): *#06#

Firmware Version: >*<<*<* 

Programming Checks: >*<<*<*> or >*<<*<*> 


Accessing the phone without a SIM card: **04*0000*0000*0000# then on 'Wrong Pin' No 


Reset English Menu: *#0000# 


300, 600, 700 Series 


Programming Menu (Short): 987 + > 


Programming Menu (Long): 923885 + > 


Field Test: 904090 + > (to exit 904090 + >) 


Phone Test: 904059 + > (to exit 3 + <) 


Phone Reset: 904060 + > 


CDMA Mode: 904093 + menu 


Analog Mode: 904095 + menu DM mode 904959 + menu


GSM PHILIPS SECRET CODES 

Philips GENIE


To view IMEI number *#06#

*#2254*# is the statusregister: C, BS, RR, MMI, CREAT.

*#2255*# will activate and deactivate the "DEBUG CALL"-Mode

*#2558*# will display the time in days,hours and minutes you are connected to the GSM network

To force a reconnection to the network, type : *#2562*# 

To view and modify the Security Code of the phone, type: *#7489*# 

To view some info about your SIM card like the phase level, the name, type: *#7378*# 

To obtain information on SIM lock, Init and Flags, press: *#3377*# 

To activate or deactivate Sleep Mode: *#7693*# 

To get info about Sleep Mode: *#8463*# 


Philips FIZZ
IMEI: *#06#

Lock Code: *#1234#

Software Version
To find software version, enter *#8377*#

The output will look something like:

Version : 0916 - EEPROM : 00000000-00 - TDA : 2445 - KISS : 0502 SIM-LCK

..or extended software version *#5644*#

output:

Version : 09162205 - EEPROM : 00000000-00 - TDA : 2445 - KISS : 0502 SIM-LCK

SM ALCATEL SECRET MOBILE CODES 

ALCATEL 

* # 0 6 # : IMEI number
* # 0 6 # : Software version
0 0 0 0 0 0 * : Net Monitor

PINOUTS AND CODES FOR PANASONIC MOBILES 

Panasonic G500

IEMI:
To view IMEI number *#06#


--------------------------------------------------------------------------------

PINOUTS

1 - Ground
2 - TX_Audio
3 - Audio_Ground
4 - HF_ON (L=ON) -> L=H/F ON
5 - AOP_Sense <- Data Adaptor Select
6 - Serial_Up <- UART up (9600,33.8kbps)
7 - Serial_Down -> UART down
8 - External_Power <- POWER FOR CHARGING
9 - Ground
10 - RX_Audio
11 - Radio_Mute -> L=MUTE
12 - HF_Sense <- L=H/F MODE
13 - Reserved L=FLASH WRITE ENABLE
14 - Ignition <- H=ON
15 - Logic_Power -> H=HANDSET ON
16 - PAON -> Power Amplifier Control Signal.

************************************************** **
Nokia 3310 Secret codes 
Jul, 08 2003 - 06:20
contributed by: mef
*#06# To find IMEI (International Mobile Equipment Identity) 

*#7780# Restores Factory Settings..(Memory, language, counters not included) 

*#3110# For checking the phone's software (SW) - called firmware revision information.

*#746025625# [*#sim0clock#] To check if the Sim-Clock can be Stopped (Sim-clock-stop is a kind of standby mode which will save battery time) 

*#92702689# [*#war0anty#] Phone asks 'warranty code:' 

6232 (OK) Displays the Month and Year of Manufacture 

9268 (OK) Displays Serial Number 

7332 (OK) Displays the date of the last repairment - if found 

7832 (OK) Displays (if found) the date where the phone was purchased 

37832 (OK) Set the Purchasing Date MMYY (This date can be set only once!) 

87267 (OK) Transfers ALL phone numbers, Logo's, and ringtones from other gsm phones

Nokia 101 cell phone lockcode 
Jul, 10 2000 - 02:35
Nokia 101 cell phones set up by Bell Mobility in Toronto can have their lock code circumvented by the following method: 

Type: * 3001 # 12345 [STO] 00 
Wait for: NOT DONE 
Type: [RCL] 01 


Clear old lock code (the last four digits) and enter a new lock code. Be very careful not to delete other characters. 

Type: [STO] 01 [STO] 
Turn power off.

Nokia 9000/9000i 
Nov, 25 2000 - 22:41
To view IMEI number *#06# 
To view Software Version enter *#8110# Latest Version is under Phone Info. 
To view Week and Year of manufacture enter *#3283#

Samsung SGH-600 / SGH-2100 
Secret Codes

*#06# -> Show IMEI 
*#9999# -> Show Software Version 
*#0837# -> Show Software Version (instructions) 
*#0001# -> Show Serial Parameters 
*#9125# -> Activates the smiley when charging. 

*#9998*228# -> Battery status (capacity, voltage, temperature) 
*#9998*246# -> Program status 
*#9998*289# -> Change Alarm Buzzer Frequency 
*#9998*324# -> Debug screens 
*#9998*364# -> Watchdog 
*#9998*377# -> EEPROM Error Stack - Use side keys to select values. Cancel and ok. 
*#9998*427# -> Trace Watchdog 
*#9998*523# -> Change LCD contrast - Only with version G60RL01W 
*#9998*544# -> Jig detect 
*#9998*636# -> Memory status 
*#9998*746# -> SIM File Size 
*#9998*778# -> SIM Service Table 
*#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error. *#9998*786# -> Run, Last UP, Last DOWN 
*#9998*837# -> Software Version 
*#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds and vibration activated. 
*#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected 
*#9998*872# -> Diag 
*#9998*947# -> Reset On Fatal Error 
*#9998*999# -> Last/Chk 

*#9998*9266# -> Yann debug screen (=Debug Screens?) 
*#9998*9999# -> Software version 

*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete) 
*0002*?# -> unknown 
*0003*?# -> unknown

SP-unlock SGH-600 and SGH 2100

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! ) 
But also changes IMEI to 447967-89-400044-0, To restore your old IMEI use the IMEI program found on the software page. 

*2767*2878# -> Custom EEEPROM Reset 

These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600

Samsung 811 
Jul, 08 2000 - 01:24
47*869#08#9

- unlock code / change roaming code / ID


SIEMENS S1 / S3 / S3 COM / S4 

To view the software date and else with S3 com, S4, S4Power 
press with SIM removed *#06# and left softkey.

To view some other stuff with S4Power 
press with SIM removed *#06# and left softkey twice.

To view the software date with S3 com, S4, S4Power 
press with SIM installed menu 98 and left softkey twice.

ACTIVATE MONITOR MODE

Siemens S1/S3

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left MENU key),
5553756, HangUp Button (Red HandSet key) 

Siemens S3 COM/S4

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button 
(left MENU key), 7684666, HangUp Button (Red HandSet key) 

Note: Now Monitor should appear at the bottom of the Network Options menu.

MONITOR MODE

Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes

Pressing the right Display Button when in monitor mode will show a 
list of the six cells with the strongest signals.

Test Mode Indicators: (* = only available when call in progress )

CH Channel Number

RX Signal Strength (dB)

N NCC (Colour Code)

B BCC (Colour Code)

CI Cell ID (in Hex)

C1+ How long before phone does forced hand over.(see RX and RXAM)

LAI Location Area Identity. Display Network ID code(42F010 = 240.01) and MSC

TXPWR Transmit Power (dB)

RXAM Receive signal strength cut-off point

TS* Time Slot Number

TA* Timing Advance. Distance from tower in Km X 2

PL* Power Level
SIEMENS S1

Here's a trick to play Tetris, also known as Klotz on a Siemens S1.
Turn the phone on. Enter PIN. Before the telephone has logged in to the
your GSM net do the following steps.

1: Choose F 9 (function settings)
2: Choose send own number and push the right button for choose.
3: Push 9 

USE 2 as < and 8 as > , rotate the klotz with 5 and drop with 4.

I have just heard from one of the programmers of the phone that Tetris 
was in the phone during development, but it was removed before it was produced. 
Apparantly someone has the patent on games in mobile phones and Siemens 
didn't want to pay the licensing fees. It was either in Menu F-9-9 or it's not there at all


Siemens C 25 

Secret Codes

SP unlock *#0003*(secret code 8 digits)#

*#06# for checking the IMEI (International Mobile Equipment Identity) 

Resets language to automatic selection : * # 0000 # then Green button

Pin Out 

1- GND 
2- SB 
3- POWER 
4- NC 
5- TX 
6- RX 
7- CLOCK 
8- DATA 
9- GND MIC 
10- HF MIC 
11- AUDIO 
12- GND AUDIO


Sagem MC959 

Secret Codes

MC959 

in main menu press * for hot-menu: 
lcd, led, vibra, tests, imei, software versions, battery voltage 

Type MENU - 5 - 1 - 1 - # to enter Engineering menu on SAGEM (RC-712, 721, 815 and 815 plus) phones.

Panasonic G500 

IEMI:
To view IMEI number *#06#


--------------------------------------------------------------------------------

PINOUTS

1 - Ground
2 - TX_Audio
3 - Audio_Ground
4 - HF_ON (L=ON) -> L=H/F ON
5 - AOP_Sense <- Data Adaptor Select
6 - Serial_Up <- UART up (9600,33.8kbps)
7 - Serial_Down -> UART down
8 - External_Power <- POWER FOR CHARGING
9 - Ground
10 - RX_Audio
11 - Radio_Mute -> L=MUTE
12 - HF_Sense <- L=H/F MODE
13 - Reserved L=FLASH WRITE ENABLE
14 - Ignition <- H=ON
15 - Logic_Power -> H=HANDSET ON
16 - PAON -> Power Amplifier Control Signal.

Mitsubishi MT- D30 

Secret Codes

Monitor mode: Hold C and press 379 
Secret menu: Hold C and press 987 
Version number: Hold C and press 597 
Phase1 and 2 : Hold C and press 499 
Warm start : Hold C and press 179 
Instant turn off: Hold C and press 999 
Unlock menu: Hold C and press 787090

Mitsubishi Trium 

*#0000# to reset the phones menu-language to natural language, set initially by the distributor. 

*#06# for checking the IMEI (International Mobile Equipment Identity) 

hold * then 5806 - show software version 
hold * then 5807 - a littel bit diffrent 
hold * then 5472 - Testmode for datacable (it seems so) 
hold * then 4329 - Activate and deactivate NETMONITOR 
hold * then 621342 - Activate and deactivate another NETMONITOR 
hold * then 3926 - shutdown 

SP lock 
You can turn around the lock routin by entering **04*PIN*PIN*PIN# now the secretcode change was applied and the software turns back to main menue. It works not on all triums, only on thos with older sofware versions


SIEMENS S1 / S3 / S3 COM / S4 

To view the software date and else with S3 com, S4, S4Power 
press with SIM removed *#06# and left softkey.

To view some other stuff with S4Power 
press with SIM removed *#06# and left softkey twice.

To view the software date with S3 com, S4, S4Power 
press with SIM installed menu 98 and left softkey twice.

ACTIVATE MONITOR MODE

Siemens S1/S3

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left MENU key),
5553756, HangUp Button (Red HandSet key) 

Siemens S3 COM/S4

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button 
(left MENU key), 7684666, HangUp Button (Red HandSet key) 

Note: Now Monitor should appear at the bottom of the Network Options menu.

MONITOR MODE

Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes

Pressing the right Display Button when in monitor mode will show a 
list of the six cells with the strongest signals.

Test Mode Indicators: (* = only available when call in progress )

CH Channel Number

RX Signal Strength (dB)

N NCC (Colour Code)

B BCC (Colour Code)

CI Cell ID (in Hex)

C1+ How long before phone does forced hand over.(see RX and RXAM)

LAI Location Area Identity. Display Network ID code(42F010 = 240.01) and MSC

TXPWR Transmit Power (dB)

RXAM Receive signal strength cut-off point

TS* Time Slot Number

TA* Timing Advance. Distance from tower in Km X 2

PL* Power Level
SIEMENS S1

Here's a trick to play Tetris, also known as Klotz on a Siemens S1.
Turn the phone on. Enter PIN. Before the telephone has logged in to the
your GSM net do the following steps.

1: Choose F 9 (function settings)
2: Choose send own number and push the right button for choose.
3: Push 9 

USE 2 as < and 8 as > , rotate the klotz with 5 and drop with 4.